Practical Inspection & Testing to the 16th Edition Wiring Regulations City & Guilds 2391

Introduction

This course is designed to provide sufficient information for delegates to carry out initial testing and commissioning procedures to ensure that an electrical installation complies with the relevant system specification and subsequent inspections.

The Course Covers

• Initial Inspection & Testing and Verification of Electrical Systems - The General Requirements - Scope - Safety - Frequency of subsequent inspections - Inspector's qualifications - Information for the Inspector
• Initial Inspection - General procedure - Scope - Detailed visual inspection
• Initial Testing - Completion and inspection certificate
• Periodic Inspection & Testing - The General Requirements - Scope - Requirement for periodic inspection and testing - Frequency of periodic inspection and testing - Inspector's qualifications - Information for the Inspector
• Periodic Inspection - General procedure - Scope - Detailed visual inspection
• Periodic Testing - Sequence of tests - Detailed periodic testing - Periodic inspection and testing report
• Reference Tests for Initial and Periodic Testing - The Sequence of Tests
• Continuity of Protective Conductors - Continuity of protective conductors main and supplementary bonding - Continuity of ring final circuit conductors
• Insulation Resistance - Site applied insulation
• Protection by Separation of Circuits - Care in use of high voltage - SELV - Functional extra low voltage - Electrical separation
• Protection by Barriers or Enclosures - Protection by barriers or enclosures provided during erection
• Protection by a Non-Conducting Location - lnsulation of non-conducting floors and walls
• Polarity Tests
• Earthing - Earth electrode resistance - Earth fault loop impedance
• Residual Current Operated Devices - Operation of residual current devices
• Test Instrument Requirement and Precautions - Instrument accuracy - Low resistance ohmmeters - Insulation resistance ohmmeters - Applied voltage testers - Earth fault loop impedance testers - Earth electrode resistance testers - R.C.D. testers

Course Duration

Four days

Certification

Company Certificate and optional City & Guild 2391 examination.

OPEN COURSES

London: 020 8819 9561
Manchester: 0161 660 7660
Norwich 01603 857 877
Glasgow: 0141 530 7710
or call free on 0800 31 88 35

e mail: info@trainingworld.co.uk

You are visitor number